FoldaRap, Peer-to-Peer Edition

Finançat el 09 / 07 / 2013
Missió complerta!
Obtingut
€ 52.835
Mínim
€ 12.000
Òptim
€ 16.000
97 Cofinançadors
Canal
  • Aportant € 10

    Supporter

    Todas las contribuciones son bienvenidas y se merecen un gran agradecimiento! Una bonita postal y unas pegatinas :)

    > 07 Cofinançadors
  • Aportant € 20

    Curiosos

    Una parte impresa seleccionada aleatoriamente entre las diferentes pruebas que permitieron desarrollar la FoldaRap.

    • las recompensas anteriores
    > 06 Cofinançadors
  • Aportant € 40

    Explorador

    Un pequeño objeto impreso :)

    • las recompensas anteriores
    > 00 Cofinançadors
  • Aportant € 60

    Coleccionista

    Una camiseta con la imagen de la FoldaRap especialmente hecha para esta edición p2p

    • las recompensas anteriores
    > 02 Cofinançadors
  • Aportant € 500

    FoldaRap P2P Edition

    La recompensa más interesante de esta campaña y probablemente la manera más rápida de obtener tu kit!

    El kit tiene todo lo que necesitas para construir la última versión de la FoldaRap, excepto las partes impresas. Encuentra una persona con RepRap cerca de ti para añadirlas a tu kit!

    (indicio: con probablemente más de 40 000 máquinas en la naturaleza, debe haber una cerca de ti o las podemos hacer imprimir de forma separada)

    > 14 Cofinançadors
  • Aportant € 600

    FoldaRap kit completo

    Todo lo que te hace falta para construir la última versión de la FoldaRap!

    > 65 Cofinançadors
  • Aportant € 900

    Taller @NYBICC

    Taller en NYBICC (Nancy, France)

    Acordamos una fecha que nos viene bien a todos, y vienes a construir tu FoldaRap con nosotros en nuestro fantástico Makerspace: the Nancy Bidouille Construction Club!

    > 05 Cofinançadors
  • Aportant € 1.000

    Taller alrededor del mundo

    Encontramos una fecha que viene bien a todos para que vaya (durante desde un fin de semana hasta una semana), para ayudarte a construir y a aprender a utilizar la o las FoldaRaps que has financiado!

    > 02 Cofinançadors
Juny
11

Done !

Cette fois on a terminé, le dernier kit (pour lequel il manquait juste une adresse) est prêt à partir :D

Maintenant la suite ça va être de continuer à améliorer la documentation (en passant il s'agit d'un wiki, tout le monde est libre...

[Llegir més]
02 Comentaris
Maig
05

T-nuts

Les écrous-T sont arrivés en Allemagne !!!
Je vais les chercher demain :D
(enfin tout à l'heure)

Je verrais aussi pour envoyer les pièces qui manquent à certaines personnes de la dernière vague, avec quelques changements dans...

[Llegir més]
01 Comentaris
Maig
03

News of the week (18)

On a reçu les barrels !!
La petite pièce usinée qu'il manquait pour terminer les derniers kits ^^

Par contre notre fournisseur d'écrou en T n'a pas envoyé la bonne référence : /
(vu qu'il est à 30min d'ici j'irais chercher les bons...

[Llegir més]
Abril
28

News of the week (17)

On a été légèrement ralenti dans notre rythme, il y a une pièce qui tardait à être réapprovisionnée mais on devrait la recevoir cette semaine, et la totalité des kits restants (18) devraient être expédiés aussitôt et en début...

[Llegir més]
04 Comentaris
Abril
14

News of the week (15)

Almost there, 25 kits left !
The organizational efforts are paying, it took some time but everything are getting better and better ^^

--

On y est presque, plus que 25 kits !
Les efforts d'organisation payent enfin, cela à pris du temps mais...

[Llegir més]
Març
30

News of the week (13)

Alors en bref, depuis la dernière fois les montages de test se sont bien passés et surtout la documentation du wiki a été mise à jour ce qui représentait pas mal de boulot !

http://reprap.org/wiki/FoldaRap_Build_Manual

Et comme prévu...

[Llegir més]
05 Comentaris
Març
09

News of the week (10)

On va reprendre le rythme des nouvelles, quelles soient bonnes ou moins :)

  • Avec la transition à la FoldaRap2 on est à cours de pièces imprimées, un premier arrivage d'autres reprappers devrait arriver en fin de semaine et d'autres par...
[Llegir més]
02 Comentaris
Febrer
28

Always Evolving : FoldaRap2

Bonjour tout le monde,

Cela faisait quelques temps que l'intention maturait mais c'est décidé, on passe de la version 1.1 à la version 2 ! Et tout les kit restant bénéficieront de ces améliorations apportées au design de la FoldaRap grâce...

[Llegir més]
04 Comentaris
Febrer
02

Hardware Kits : done

Le week-end dernier ont faisait l'inauguration du local, pour célébrer la fin des travaux (ou du moins on va s'arrêter là pour le moment). Il y a eu pas mal de monde, et on terminait également les deux derniers atelier avec Sam et Dai qui ont...

[Llegir més]
04 Comentaris
Gener
08

Moar Motors !

We recently received more motors ^^

[Llegir més]
22 Comentaris
Desembre
28

Winter News !

Dear backers,
Things have not went as we wish they could during the last month, but it's not that bad and for this last long post of the year I have lot of things to tell you about :)

Firstly,for most of you who are still waiting, I'd like...

[Llegir més]
01 Comentaris
Desembre
15

News of the week (50)

Bonjour à tous !

Quelques nouvelles des dernières semaines, plein de choses !

  • La dernière fois je vous parlais de la découpe laser, en voici une photo (d'autres sur l'album...
[Llegir més]
06 Comentaris
Novembre
27

News of the week (48)

Bonjour à tous,

Je voulais publier ce message au début de la semaine mais la plateforme a la fâcheuse tendance à ne pas enregistrer le brouillon si on ne se relog pas avant...

Dans les nouvelles des dernières semaines :
ont continue...

[Llegir més]
05 Comentaris
Novembre
11

News of the week (45)

Bonjour à tous !

Quelque nouvelles de la semaine dernière et son long week-end, parfait pour faire plein de choses :
Pour l'avancement de la campagne j'ai remplacé le 12% de la dernière fois par ce qu'il reste à faire à la place...

[Llegir més]
11 Comentaris
Novembre
03

Completion of batch 2 : 12%

Certains l'ont déjà aperçu, mais sur la page "liste d'attente" j'ai rajouté un pourcentage de la situation : 12% :)

http://tinyurl.com/lz4afpr

Nous sommes évidemment tous impatients de pouvoir avancer dans la réalisation de cette...

[Llegir més]
Octubre
20

First FoldaRaps delivered !

Le premier a été construit avec David en Août, le second a été livré récemment au Lycée G. Beaumont pas loin de Nancy, et quand au troisième il s'agit du dernier "atelier autour du monde" pour Kourourei dans deux semaines ;)

S'en...

[Llegir més]
Octubre
10

Say Hello to Open Edge :D

Tout juste rentré de Rome il y a quelques jours, en plein dans la Fête de la Science à présent... mais lundi soir j'ai enfin pu signer les statuts de Open Edge !!

http://wiki.fablab.is/wiki/OpenEdge/fr

Ne pouvant continuer en temps...

[Llegir més]
02 Comentaris
Octubre
01

T4 rewards sent !

The other day I could ship the two last intermediate rewards, two nice t-shirt with this illustration :)

--

L'autre jour j'ai posté les deux dernière récompenses intermédiaires, deux t-shirt arborant cette illustration, le résultat étant...

[Llegir més]
05 Comentaris
Setembre
26

The (locally made) barrel works !

Things are still very busy here, the annual Science Faire is coming (for which our hackerspace will show many projects, including a giant RepRap that I'm in charge of!), it's also the 20th anniversary of the ENSGSI-school (I was asked to make tons...

[Llegir més]
Setembre
18

A simple part at the heart of everything.

Often everything boils down to a simple thing, upon which a whole assembly rely and needs to work. It's easy to think of our hearth, brain, and organs... in the case of a RepRap I don't know what this one would be, but the hotend is one of the most...

[Llegir més]
02 Comentaris
Setembre
08

Summer news !

Some news at the end of this summer :

I'm back from the FabLab annual forum which took place in Japan (http://fab9jp.com). It was a very nice experience, mini-report coming soon (544 pictures to upload).

The T-shirts are done ! Thanks to David...

[Llegir més]
Agost
15

T-shirt in progress

You will quickly notice the difference between the two pictures ;-)

The first is the one I used for all the illustrations last year, printed as big as an A4 it was sufficient. But some month ago I participated in an event where they wanted...

[Llegir més]
Agost
09

Paypal frozen / Paypal bloqué

Some news from this week !

After having sent back the signed contract at Goteo, the funds made by Paypal were finally transferred to my Paypal account yesterday (for those made with a credit card of by bank transfer I guess they will arrive...

[Llegir més]
02 Comentaris
Juliol
29

First rewards / Premiers paliers

Before going to http://ohm2013.org I could ship all the first tiers rewards (postcards, stickers, printed parts), the next ones are the t-shirts :)

Avant de m'en aller à OHM j'ai pu poster les deux premiers paliers de récompenses (carte...

[Llegir més]
01 Comentaris
Juliol
18

Hotend & Shipping / Buses et Livraison

Sometimes it's hard to manage to live 3 lifes at once (fablabs, reprap and my daily job), that said, I owe you many informations as I want to keep you updated on the progress of this project :)

My main message will be "don't be hurry", we are all...

[Llegir més]
04 Comentaris
Juliol
09

Merci.

Je crois qu'il serait difficile de trouver meilleur titre pour célébrer la fin de cette étonnante campagne.

En quelques chiffres, nous terminons sur un incroyable 445% / 53 435€ et 98 co-financeurs, ce qui dépasse largement le minimum...

[Llegir més]
06 Comentaris
Juliol
06

Préparation

Entre deux déplacements la préparation continue !

Une petite photo pour patienter en attendant que je termine la prochaine news, justement à propos des dates estimées de livraison et du calendrier à venir... comme vous avez été nombreux...

[Llegir més]
02 Comentaris
Juny
22

Build Manual Updated

Recently I received more sets from other french reprappers ^^
The network is growing, with now 6 persons actually printing FoldaRap sets !

And most important for futur builders : I'm updating the wiki documentation for the v1.1 with even more...

[Llegir més]
01 Comentaris
Juny
02

Hardware boxes

Today a friend helped me to pack some of the hardware !

I like to use these little boxes, they are convenient to check that you have everything, and make the assembly way quicker by avoiding to have to look in a pile of plastic bags for the...

[Llegir més]
01 Comentaris
Maig
27

Peer-production powa !

When I talk about that idea of distributed manufacturing, some people immediately think of the difficulties (about quality controls, etc.)

But I hope this experience will serve as one more exemple that it is a viable way to make things...

[Llegir més]
01 Comentaris
Maig
24

A crazy week

For many reasons it is a crazy week (dare I say it while it's not yet finished!)

  • first, we almost jumped to 200% of the funding goal in less than a week, while there is still a second round of 40 days left, that mean a lot of kits and...
[Llegir més]
Maig
18

You all are incredible !

In less than a week we went from 83% to an astounding 142% !

I will never thank you enough, and my friends will probably join me, because as promised in the "COLLECTIVE BENEFITS" this optimum is allowing us to afford a lasercutter for our local...

[Llegir més]
Maig
15

Made In...

Yesterday we reached the minimum goal, congrats to all !

This week I started to receive some set of parts printed by the community, the funny thing would be to add a "Made in... Nancy-Orléans-Nantes-etc." with all the cities where the parts...

[Llegir més]
Maig
12

83% !

We are close to the goal, keep sharing !

--

The last week I was at the OuiShare Festival (http://ouisharefest.com/), "The first major European event dedicated to the collaborative economy."
Off course I brought my FoldaRap, to pitch in the...

[Llegir més]
Abril
28

Here we go !

It's impressive to see how many supports we gathered so quickly : one week after the launch we are already above 50% !

The latest workshop proved me once again that this model is quite easy to build and...

[Llegir més]